Eastwood Rust Encapsulator Plus Paint Gallon

Eastwood has been one of the leading names in rust prevention for many years. Now we bring you twice the corrosion resistance of our original Rust Encapsulator in a simple to apply moisture cure coating. Spray it, brush it or roll it on. It does not matter, just get it on to protect your next project from corrosion. Use to protect or restore car frames, boat trailers, utility trailers, outdoor metal furniture, mailbox posts, bilco cellar doors and more! Looks great or topcoat with your product of choice. Should be top coated in direct sunlight applications. Only 2 quarts required for full size car or truck frame.

Specifications

Matte Black Finish
Single component aluminum pigmented coating
67% solids by weight
Approximate coverage: 96 SQ FT per quart for one coat
1 coat assures maximum protection
Brush, roller or spray applied
Paint Gun: HVLP gravity or siphon with a 1.4 minimum needle/nozzle
Re-coat able after 4 hrs.- if top coating after 48 hrs., scuff surface with 320 grit paper
2 hrs., tack free
Topcoat able with virtually any high-quality coating
Maximum service temp of 350 Fahrenheit

Recommended Substrates and Prep

Apply product as a primer/Encapsulator over clean or corroded (rusted) steel or cast iron
Prep surface by mechanically cleaning loose flaking rust with a stiff brush or wire brush/wheel
Remove any grease, oils or other surface contaminants with a solvent such as PRE or Acetone
Apply by brush, roller or spray

• 2X Stronger Than Original Rust Encapsulator
• Passed over 1,000 hours of salt spray testing
• Easy Application Roll, Brush, or Spray directly to metal or apply over rust
• Heat Resistant Up To 350 Degrees F
• Should be top coated in Direct Sunlight Applications